Eicon Networks C2x Family manual Regulatory information for Australia

Page 22

Regulatory information for Australia

This customer equipment shall only be installed in a PC that requires the use of a tool to gain access to internal parts (e.g. this customer equipment must not be installed in a PC with a ‘flip lid’).

Proper installation of the Eiconcard C2x card requires that it is screwed to the metal backplate of the computer. This ensures proper grounding, which is necessary for safety purposes.

This customer equipment may only be installed in host equipment where there is at least 2 mm of air gap between the customer equipment and adjacent boards (PCBs).

Only ACA permitted line cord set(s) or made from ACA certified compo- nents shall be used as replacements with this customer equipment.

Eiconcard C2x

Warning: This customer equipment is to be installed and maintained by service personnel as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel. It may be hazardous if your computer is not properly plugged in and grounded.

22

Regulatory information for Australia

Image 22
Contents Eiconcard C2x Family First Edition July 203-225-01 Table of Contents Page Introduction Hardware FeaturesAbout this Manual Installing the Eiconcard C2x Install the Eiconcard C2xTest the Eiconcard C2x Europe and most countries worldwide Making an Isdn ConnectionNorth America and Others Eiconcard C21 U-interface Connecting to an NT1 Eiconcard C21 S/T-interfaceTermination How do I determine the termination value? Single Isdn DeviceInstalling a Terminating Resistor Multiple Isdn DevicesInterface Specifications Making a V.24 ConnectionV.24 DCE Interface Ccitt #LED Functionality Channel StatusTechnical Specifications Regulatory Information for the USA International Regulatory InformationDeclaration of Conformity FCC Part 68 Notice Regulatory Information for Canada Regulatory Information for Europe EU Declaration of ConformitySafety Status Selv User/Installer Instructions for the United KingdomRegulatory information for Australia Page 203-225-01