FieldServer FS-RA-CLX-PRO manual Power UP the Device, Install and RUN the Utility Software

Page 6

SlotServer Start-Up Guide

Page 6 of 14

 

 

2INSTALLATION

The SlotServer plugs directly into the AB1756 ControlLogix rack. Take note of the slot number used for the SlotServer as this will be needed when configuring the I/O in the RSLogix software.

2.1POWER UP THE DEVICE

Apply power to the device. Refer to the panel to ensure that the SlotServer has powered up successfully. The diagram in Section 1.4 indicates the location of each of these items on the SlotServer panel.

Scrolling Display

 

 

This will Display an OK status when the SlotServer has powered up successfully.

 

 

Card Status

The Comm and OK lights will indicate green when the SlotServer has powered up

Indicators:

successfully. The Sys indicator will indicate green if the external nodes are all

 

 

communicating properly; and red otherwise.

 

 

2.2INSTALL AND RUN THE UTILITY SOFTWARE

Plug the supplied USB flash drive into the USB port on a PC/laptop.

Open Index.html to get the menu of options

Run the Install option and follow the installation instructions.

Once installed, the FieldServer Utilities can be located in the Windows Start menu and as a desktop icon.

2.3CONNECT THE PC TO THE SLOTSERVER OVER THE ETHERNET PORT.

If connecting through a hub/switch, use the supplied Cat5 UTP Ethernet cable to connect between the Ethernet port of the SlotServer and the hub. Refer to Section 0 for more information.

If it is necessary to connect the PC directly to the SlotServer, a cross-over cable is required (not supplied).

Disable any wireless Ethernet adapters on the PC/Laptop,

It is important that the PC/Laptop is on the same subnet as the SlotServer. The default IP address on the SlotServer Ethernet port is 192.168.2.X. Refer to the FieldServer Utilities Manual for information on how to change the SlotServer’s IP address.

2.4USING THE PING UTILITY TO IDENTIFY THE SLOTSERVER ON THE NETWORK

Select StartProgramsFieldServer Utilities, browse to the Ping Utility and select it. The display should show

SlotServer Name

IP Address (192.168.2.X)

SlotServer Version

If necessary, refer to Appendix A for troubleshooting tips.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

Image 6
Contents SlotServer Start-Up Guide Table of Contents Supplied Equipment MountingDiagram of SlotServer showing ports and displays Slotserver Ports and DisplaysTechnical Specifications Power UP the Device Install and RUN the Utility SoftwareConnect the PC to the Slotserver Over the Ethernet Port Change the Configuration File to Meet the Application Connect Using Remote User Interface RuinetUpload the Default Configuration Download the Updated Configuration FileTest and Commission the Slotserver Appendix A. Useful Features Appendix A.1. LED FunctionsEthernet Lights Appendix B. Troubleshooting Appendix B.1. Things to check when communications failAppendix B.5. Technical Support Appendix C. Vendor Information Appendix D. Limited Warranty