Page 3 of 10 | |
|
|
1 PRE-INSTALLATION CHECK LIST
1.1Supplied equipment
FS-B-OPC-01 Series FieldServer
loaded with Modbus RTU driver, SMT Ethernet driver, FST OPC Server Configurator and any other drivers ordered.1
USB Flash Drive loaded with:
FieldServer Configuration Manual
FieldServer Utilities Manual
Driver Manual(s) specific to all Drivers ordered with the FieldServer.
Support Utilities (for the following platforms only:
Windows XP
Windows 2000
Windows NT
Windows 98
Any additional folders related to special files configured for a specific FieldServer.
Additional components as required
Accessories:
6 ft Serial
Power Supply
1.2Mounting
The
1.3Wiring
Select an external power supply certified for safety, for the correct destination country and an output rating, which is considered a NEC Class 2 circuit or is a SELV Limited power source with the following ratings:
The operating environment for the product is 0 to 60°C (32 to 140°F).
1Note that a default configuration file has already been loaded onto the FieldServer. Check the Driver Manual and the FieldServer Configuration Manual for further information on this file.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)