Page 9 of 10 | |
|
|
If a custom configuration is not purchased, a template config.csv is loaded on the FieldServer to facilitate user configuration of the FieldServer.
Refer to the Configuration Manual in conjunction with the Driver supplements for information on configuring the FieldServer. Note: FieldServer Technologies offers training on this topic as well as a configuration service to complete this portion of the work. See www.fieldserver.com for specific details.
4.5Run the FieldServer PC Bridge Utility
If a Custom Configuration was ordered, this software will run automatically and this step can be skipped
Once the config.csv file is
4.6Configure the FST OPC Server Configurator to meet the Application
If a Custom Configuration was ordered this step can be skipped
If a Custom Configuration was not ordered, please follow the instructions supplied in the
The OPC Configurator is installed in c:\program files\FieldServer\FST., there is a shortcut on the desktop and it can be found in the start menu under StartProgramsFST OPC Server for FieldServers.
4.7Test and commission the FieldServer
Connect the FieldServer to the third party device(s), and test the application.
It may be necessary to connect a standard PC monitor, PC Keyboard and PC Mouse to perform any diagnostics or configuration
If necessary, refer to the Troubleshooting manual which can be found in the FieldServer utilities directory under Documentation.
Before contacting FieldServer technical support, send your config.csv file, and the *.fst file from your FST OPC Configurator to support@fieldserver.com. In the email, also provide a detailed description of the problem(s) occurring on the system.
Application notes and other resources are available on the web at www.fieldserver.com
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)