FieldServer FS-B-OPC-01 manual Ethernet Connection

Page 7

FS-B-OPC-01 Series FieldServer Start-up Guide

Page 7 of 10

 

 

3.2Ethernet Connection

If connecting to a hub/switch use the provided Cat5 UTP Ethernet cable to connect the FieldServer to the hub. If connecting directly to the device, an Ethernet Crossover cable is required (not provided).

Note that the front USB ports and Compact Flash port are not activated.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver.com

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Description FS-B-OPC-01 Start-up GuideTable of Contents Supplied equipment WiringMounting Product Description DimensionsSpecifications RS-232 connection Connection to the DeviceEthernet Connection Operation Connect and Power the FieldServerConnect all wiring to unit Change the Configuration File to Meet the ApplicationTest and commission the FieldServer Run the FieldServer PC Bridge UtilityAppendix A. Limited Warranty
Top Page Image Contents