Abit Official Manual for IS7 Series: Expert Guide for IS7 Computer Hardware

Page 46

3-6

Chapter 3

 

 

[EGA/VGA]: (Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA, SVGA and PGA monitor adapters.

[CGA 40]: (Color Graphics Adapter) Power up in 40-column mode.

[CGA 80]: (Color Graphics Adapter) Power up in 80-column mode.

[Mono]: (Monochrome adapter) Includes high-resolution monochrome adapters.

Halt On:

This item determines whether the system stops if an error is detected during system boot-up. [All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error.

[No Errors]: The system-boot will not stop for any error detected.

[All, But Keyboard]: The system-boot will stop for all errors except a keyboard error.

[All, But Diskette]: The system-boot will stop for all errors except a diskette error.

[All, But Disk/Key]: The system-boot will stop for all errors except a diskette or keyboard error.

Base Memory:

This item displays the amount of base memory installed in the system. The value of the base memory is typically 640K for system with 640K or more memory size installed on the motherboard.

Extended Memory:

This item displays the amount of extended memory detected during system boot-up.

Total Memory:

This item displays the total memory available in the system.

IS7 Series

Image 46
Contents IS7 Series Copyright and Warranty Notice Table Of Contents Appendix a Features & Specifications IntroductionAudio Order Information Layout Diagram IS7-G/IS7/IS7-E Layout Diagram IS7-E2/IS7-E2G/IS7-E2V Layout Diagram IS7-M Layout Diagram IS7-V2 IS7 Series Hardware Setup Install The MotherboardInstall Pentium 4 CPU and Heatsink Supporting-Base Install System Memory IS7-G/IS7/IS7-E/IS7-MIS7-E2/IS7-E2G/IS7-E2V/IS7-V2 Page Connectors, Headers and Switches Page IS7-V2 USB-PWR1 VCC VCC Chapter Page Page GND IS7-G/IS7/IS7-E/IS7-M Hardware Setup System Management Bus Headers Chapter Hardware Setup IS7-E2/IS7-E2G/IS7-E2V IS7-V2 User’s Manual Page Page Chapter Page IDE1 IDE2 SATA1 SATA2 Page IS7-E2/IS7-E2G/IS7-E2V IS7-V2 IS7 Series Page Chapter Bios Setup Press DEL to Enter SetupSoftMenu Setup User DefinePage Standard Cmos Features Back to Standard Cmos Features Setup Menu Chapter Advanced Bios Features Chapter Page Advanced Chipset Features Dram Timing SelectablePage Integrated Peripherals OnChip IDE DeviceSata RAID ROM SATA1 SATA2 OnChip PCI Device SuperIO Device Bios Setup UR2 Duplex Mode Onboard PCI Device Power Management Setup WakeUp by Alarm Page PnP/PCI Configurations AGP LAN PC Health Status Set Password Load Fail-Safe DefaultsLoad Optimized Defaults Save & Exit SetupIS7 Series Appendix A. Install Intel Chipset Software Utility Appendix a Install Intel Application Accelerator RAID IS7-G, IS7 Click Next Click Finish to complete setup IS7 Series Intel Serial ATA RAID Configuration Utility IS7-G Appendix B Appendix C. Install Audio Driver Appendix C Appendix D. Install LAN Driver Appendix D Appendix E. Install Silicon Serial ATA RAID Driver IS7-G Click Finish Bios Setup for Serial ATA RAID IS7-G RAID Configuration Utility MenuOption Delete RAID set Appendix F. Install VGA Driver IS7-M Appendix F Appendix G. Install USB 2.0 Driver Appendix G Appendix H. Abit EQ The Hardware Doctor Utility Appendix H Appendix I. FlashMenu Bios Update Utility Appendix Appendix J. Troubleshooting Need Assistance? Appendix J User’s Manual Technical Support Form Appendix K. How to Get Technical Support Appendix K 4QX, UK Thank You Abit Computer Corporation