Accordance Systems 2000 user manual LCD message with both disks installed on Araid

Page 13

ARAID 1500, ARAID 2000 User’s Manual

Changing Single Mode to Default Mode

Performing a Manual Mirror-On-Demand

When you change the operation mode switch from Single to Default, the target (lower bay) drive will be automatically rebuilt with the contents from the source drive (upper bay).

LCD messages are shown below.

◎Change mode from Single to Default

Note: Do not remove either drive while the disk rebuild is in progress, to avoid data loss.

Booting the system with one hard drive in default mode

(1)ARAID can boot the system with one hard drive from either drive.

LCD message when the source drive is in the upper bay:

LCD message when source disk is on the lower bay:

(2)When both drives are installed, ARAID will automatically detect the source disk (primary HDD) and boot the system. When source disk fails, ARAID will automatically boot the system from target disk (secondary HDD). The message displayed on the LCD is shown below.

LCD message with both disks installed on ARAID

13

Accordance Systems Inc.

Image 13

Contents Araid Models 1500 User’s Manual V1.0 Revision a Table of ContentsThank you for your purchase of Araid 1500 Important Notice Please read the following before using the Araid Disk ArrayAraid 1500 with two trays Unpacking the Araid 1500Mobile Racks Specifications Araid 1500 and 2000 FeaturesSystem requirements Araid 1500 and 2000 Operations Overview Parts on Front Panel Function Setup Jumper descriptions Lower Right corner Rear View and Jumper SettingsParts on rear panel of an Araid 1500 RAID 1 Basic Operation Test Mirroring Araid 1500 or 2000 Operational TestsRAID 1 Auto Rebuild Function Test RAID 0 Basic Operation Test StripingARF Compatible Operating Systems Auto Rebuild Function ARF of Araid 1500Sata Model Auto Rebuild Instruction ARF for RAID Booting With One Hard Drive in Single Mode Booting the system with one hard drive in default mode LCD message with both disks installed on AraidAraid 1500, Araid 2000 User’s Manual RAID System Management Cooling Fan and TemperatureFront Panel Messages Monitoring via AraidEyeNetwork Management via Snmp Accordance’s OpManager NMSHard Drive Failure and Troubleshooting Guide Power failure while disk rebuild is in progress PC Bios setupPreventing and recovering from an unexpected virus attack Araid Questions & AnswersCase Study Replacing and Upgrading Hard DrivesAppendix a Test Procedure & Error Messages SymptomAraid Series Equipment & Environment