ARAID 1500, ARAID 2000 User’s Manual
Booting With One Hard Drive in Single Mode
(1)If you want to boot the system with one hard drive (source disk), place source disk in the upper bay. ARAID can then access to source disk only. LCD message is shown below.
◎ARAID in Single mode (OFF indicates power for target disk is OFF)
If you place source disk in the lower bay, the system will ask for a system disk. ARAID cannot access to source disk placed in the lower bay. LCD message is shown below.
◎ARAID in Single mode (OFF indicates power for target disk is off)
(2)Even both disks are installed, ARAID can only access to source disk, for the power of target disk is still OFF. LCD message is shown below.
◎ARAID in Single mode (OFF indicates power for target disk is off)
12
Accordance Systems Inc.