Infrasonic BLOW5D user manual Installation, Positioning Speakers

Page 8

3.INSTALLATION

3.1.POSITIONING SPEAKERS

IMPORTANT NOTES

ƒBe careful not to grab or touch the speakers when in use. Damage may occur.

ƒDo not put anything on the unit.

ƒWhen the speaker is in operation. The heat sink in the rear side will be hot. Take care not to touch it.

ƒThe heat sink which is behind of unit is sharp. You can be harmed with it. Be careful to handle it

Positioning monitor speakers correctly in the control room is very important to their performance. In order to monitor with your speaker units at their maximum capability, appropriate listening environment and correct placement are required. Please see our suggestions.

Two speaker units and the listener should align to form a regular triangle. Refer to the following diagram.

< Positioning >

The height of the units - The top of the

woofer should come up inline with your

ears, in your listening environment.

(Refer to the following diagram.)

< Height of unit >

8BLOW5/BLOW5D User’s Manual

Image 8
Contents User’s Manual Important Safety Instructions Introduction IndexMain Features Panel Descriptions Front ViewRear View Analog InputsAES/EBU Digital Input Connector Pdif Coaxial Input Connector Installation Positioning SpeakersAdapting the BLOW5 to the Room Acoustics Input Sensitivity ControlRoom Compensation Control Analog Audio Input Powering UPConnection Digital Audio Input Included in BLOW5D Specifications System / EnclosureDA-912 END Users Warranty End User WarrantyBLOW5/BLOW5D User’s Manual