All of these items may be changed by opening a browser on a PC and going to the IP address of the Mobile Gateway™ video server by entering that address in the browser address bar (e.g. http://192.168.0.2.)
Hardware installation
For best results, hardware connections should be initiated in the following order:
1.Connect the network cable to the Mobile Gateway™ video server NIC.
2.Plug the cameras into the Mobile Gateway™ video server.
3.Connect the power cord to the Mobile Gateway™ video server.
4.Power on the Mobile Gateway™ video server.
5.Run the Mobile Gateway™ video server Finder utility to configure the Mobile Gateway™ video server.
Using The Mobile Gateway™ Finder Utility
Mobile Gateway™ configures in much the same way as a “standard” analog to IP video server: use the Mobile Gateway™ Finder utility to locate servers and configure them remotely on the network.
To use the Mobile Gateway™ Finder utility, insert the CD into a
Draft version 1.7 | 4 |
| Inetcam® and iMViewer™ are the property of Inetcam, Inc. |