Ikelite 6870.40 for Canon EOS 40D instruction manual Ikelite SLR-DC Housing

Page 1

Ikelite SLR-DC Housing

i n s t r u c t i o n

m a n u a l

#6870.40 for Canon EOS 40D

Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 40 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.

The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory. Housing is pressure tested to 200' (60m).

Image 1
Contents Ikelite SLR-DC Housing Page Opening the Housing Setting the Conversion Circuitry Strobe ID Switch Installing the CameraFlash Connection for External Strobes Installing Camera in HousingPlace housing face down in your lap Closing the HousingZoom Clamps & Gear Sleeves Included with Housing Preparing to Install Zoom Clamp & Gear SleevePage Install the Gear Sleeve Installing the Zoom Clamp Installing the Zoom Clamp & Gear Sleeve On Type 2 LensesAfter the Zoom Clamp is installed Installing the Gear SleeveInstalling the Port Port Seal Inside View Installing the Port To Remove PortUsing External Strobes Mode and Compensation Buttons For Substrobe Up-Date Lubricants Using Non Ikelite Strobes with this HousingPre-Dive Your System Strobe ArmsStoring the Housing Optional AccessoriesChoosing a Port Port InformationPorts Dome Flat Port Lens & Port RecommendationsMaintenance Control Maintenance Page General Tips Photo Tips Ikelite Limited Warranty