Ikelite 6870.40 for Canon EOS 40D instruction manual Strobe Arms, Pre-Dive Your System

Page 18

Strobe Arms

This housing offers two types of arm mounting systems. The top of the rubber handles utilize Ikelite's Quick-Release Arm, available with the SA-100R Arm system.

The bottom of the rubber handles have a wing nut that accepts the Ikelite Tray Mount. The Tray Mount comes with the Ikelite SA-125 Arm system and the SA-100T Arm system.

Pre-Dive Your System

It is recommended that you take the complete system into a swimming pool before use in open water. This will give you a chance to become familiar with the handling and operation of your housing and strobe(s).

18

Image 18
Contents Ikelite SLR-DC Housing Page Opening the Housing Installing the Camera Setting the Conversion Circuitry Strobe ID SwitchInstalling Camera in Housing Flash Connection for External StrobesClosing the Housing Place housing face down in your lapPreparing to Install Zoom Clamp & Gear Sleeve Zoom Clamps & Gear Sleeves Included with HousingPage Install the Gear Sleeve Installing the Zoom Clamp & Gear Sleeve On Type 2 Lenses Installing the Zoom ClampInstalling the Gear Sleeve After the Zoom Clamp is installedInstalling the Port Installing the Port To Remove Port Port Seal Inside ViewUsing External Strobes Mode and Compensation Buttons For Substrobe Up-Date Using Non Ikelite Strobes with this Housing LubricantsStrobe Arms Pre-Dive Your SystemOptional Accessories Storing the HousingPort Information Choosing a PortPorts Lens & Port Recommendations Dome Flat PortMaintenance Control Maintenance Page General Tips Photo Tips Ikelite Limited Warranty