Trouble Shooting

If the monitor fails to operate correctly, please follow the steps below for a possible solution.

1.Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have.

2.Consult the following charts if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists.

3.If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.

Problem

Check

A The picture does not appear.

ENGLISH

(Power indicator does not light up.)

(Power indicator is green.)

(Power indicator is orange.)

B The screen is not

synchronized.

The Power Cable is firmly seated in the socket.

The Power Switch is turned ON.

The AC socket is live. Please check with another piece of equipment.

If the blank screen saver is in active mode, touch the keyboard or the mouse.

Increase the Contrast and/or Brightness.

The computer is ON.

The Signal Cable is properly connected.

The signal timing of the computer is within the specification of the monitor.

If the monitor is in power management mode, touch the keyboard or the mouse.

The computer is ON.

The Signal Cable is properly connected.

The signal timing of the computer is within the specification of the monitor.

The monitor selects the correct signal input. Press the Input Select Button once to check.

The Signal Cable is properly connected.

The signal timing of the computer is within the specification of the monitor.

The video output level of the computer is within the specification of the monitor.

C The screen	The signal timing of the computer is within the specification of the
position is not in	monitor.
the center.
D The screen is	The video output level of the computer is within the specification of the
too bright or too	monitor.
dark.	The screen may be too bright due to the video output level difference of
	the computer. In this case, adjust the Contrast.
E The screen is	Check if there are any sources of strong magnetic fields such as TV,
shaking.	speakers, etc. nearby.

If yes, remove them from the area of the monitor or change the position/ direction of the monitor to avoid magnetic field interference.

The power voltage is within the specification of the monitor.

The signal timing of the computer is within the specification of the monitor. Moiré correction is working properly.

TROUBLE SHOOTING 14