Iiyama MA203DT D user manual Customer Service, Cleaning

Page 6

ENGLISH

OTHERS

UNSUITABLE LOCATION FOR USING THE MONITOR

The monitor is not suitable for use in the presence of a FLAMMABLE ANAESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE.

The monitor is not suitable for use in areas that patients are cared for. This encloses a space within the room 1.83 m (6 feet) beyond the perimeter of the bed (examination table, dental chair, treatment booth, and the like) in its intended location, and extending vertically 2.29 m (7-1/2 feet) above the floor.

CUSTOMER SERVICE

NOTE

￿ If you have to return your unit for service and the original packaging has been

 

discarded, please contact your dealer or iiyama service center for advice or

 

replacement packaging.

CLEANING

WARNING

￿ If you drop any materials or liquids such as water into the monitor when cleaning,

 

unplug the power cable immediately and contact your dealer or iiyama service

 

center.

 

 

CAUTION

￿ For safety reasons, turn off the power switch and unplug the monitor before you

 

clean it.

NOTE

￿ The CRT screen is protected by an anti-reflection & anti-static coating. Do not scratch or

 

rub the screen with a hard object, as this could damage the coating.

 

￿ Never use any of the following strong solvents. These will damage the cabinet and

 

the CRT.

Thinner

Spray-type cleaner

Benzine

Wax

Abrasive cleaner

Acid or Alkaline solvent

Solvent for cleaning glass

Alcohol solvent

Solvent with anti-static agent

 

CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

CRT Wipe the CRT with an enclosed cleaning cloth to remove smudges (such as fingerprints). Tough stains can be removed with a cloth lightly moistened with water or mild detergent diluted by 10%. Make sure to wipe the CRT surface using a sideling movement.

3 FOR YOUR SAFETY

Image 6
Contents MA203DT D Congratulations FCC Declaration of Conformity For Your Safety Safety PrecautionsDo not Touch the Plug with WET Hands Customer Service CleaningFeatures AccessoriesBefore YOU Operate the Monitor For Windows 95/98/2000/ME/XP Users Location of Controls OPQ OFFConnecting Your Monitor Menu Screen Control Operating the MonitorAdjustment Menu Contents Size Too small Convergence To correct misconvergence For horizontal lines Function Power Management Feature Trouble Shooting Normal phenomenon on ‘Diamondtron NF-CRT’ monitors Specifications AppendixPreset Modes Connector PIN AssignmentIiyama Corporation