HotBrick LB-2 manual Settings Multi DMZ

Page 41

 

HotBrick Network Solutions

Settings – Multi DMZ

 

 

Enable

Use this to enable or disable the DMZ setting, as required.

 

 

Name

Enter a name to assist you to remember this setting. This name has no effect

 

on the operation.

For Static IP

 

Public IP address

Enter the WAN port (Internet) IP address you wish to associate to a PC. This

 

IP address must have been allocated to you by your ISP.

Private IP

Enter the IP address of the PC you wish to associate with this WAN port IP

Address (LAN)

address. This IP address should be fixed, or reserved. (See the Host IP

 

section for details on reserving an IP address.)

For Dynamic IP

 

 

 

WAN

Select the desired WAN port.

 

 

Session

Select "DHCP" if the IP address on this WAN port is dynamically

 

assigned. You can only select assign one (1) Private (LAN) IP address to

 

each port.

 

If using multi-session PPPoE, select the desired PPPoE session. These

 

sessions are defined on the Advanced PPPoE screen. You can assign

 

one (1) one (1) Private (LAN) IP address to each PPPoE session.

Private IP

Enter the IP address of the PC you wish to associate with this WAN port IP

Address (LAN)

address. This IP address should be fixed, or reserved. (See the Host IP

 

section for details on reserving an IP address.)

Access Group

You can decide the users to have the authority of using DMZ, by define the

 

groups.

Direction

For DMZ, you can allow inbound, outbound only, or both inbound and

 

outbound both.

37

Image 41
Contents Load Balancer LB-2 User’s Guide Page Table of Contents Operation and Status This gives twice the bandwidth of a single modem Internet FeaturesIntroduction PPPoE Session Management Port Switching Hub Other FeaturesPhysical Details Package ContentsLED Action Condition Reset Button Default SettingsRear Panel Load Balancer LB-2 LAN PortsWindows Tftp utility LB-2 Procedure Basic SetupConfiguring the Load Balancer LB-2 for your LAN OverviewNo Response ? Configuration Settings LAN & DhcpIP Address Subnet MaskRange Dhcp IP AddressARP Proxy Dhcp Client ListInstallation Diagram LB-2 Installing the HotBrick Load Balancer LB-2 in your LANPrimary Setup Screen LB-2 Settings Primary Setup Optional TCP/IP Settings Configure PCs on your LANInternet Access OverviewLinux Clients Accessing AOLMacintosh Clients Fixed IP Address Port Options Advanced Port SetupConnection Options Settings Port OptionsTransparent Bridge OptionLoad Balance Settings Load BalanceLoad Balance Configuration Buttons StatisticsInterface Advanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpHost IP Setup Advanced SetupHost Network Identity Settings Host IP SetupBinding Host NetworkHost & Group ListVirtual Servers Connecting to the Virtual ServersEnable Settings Virtual ServerServer Type AddressCustom Virtual Servers Settings Custom Virtual ServersSelect Custom Server Server List Name Custom ServerCustom Virtual Server Special Application Configuration Settings Special ApplicationsSpecial Applications Select Special Application Name Select Name ItemUsing a Special Application on your PC Dynamic DNS To use the Dynamic DNS featureSettings Dynamic DNS Multi DMZ Multi DMZSettings Multi DMZ UPnP Option Settings UPnPUPnP NAT Configuration Advanced FeaturesSettings Advanced Features Session Persistency Protocol, Port Range Remote AccessExternal FiltersProtocol Protocol and Port Binding Using Remote Web-based SetupInterface Smtp Simple Mail Transport Protocol Binding Block URL Security ManagementBlock Internet Settings Block URLSetup Access Group Access FilterBlock Well-known Filter SettingPorts User-defined Ports toSession Limit Firewall Exception Firewall Exception EnableProtocol Foreign Port RangeQoS Setup QoS ConfigurationData QoS Setup QoS FeatureIP TOS Type Service Feature Policy ConfigurationNetwork Admission Policy Data Policy ConfigurationSnmp Management AssistantSystem Information Trap Targets Settings SnmpEmail Alert Settings Email Alert Syslog Syslog Global Syslog ConfigurationKeep Sent Messages Syslog ServerAdmin Password Screen Admin PasswordFirmware Upgrade Screen Upgrade FirmwareRouting Advanced LAN ConfigurationExisting Dhcp Server Static Routing Example Configuring Other Routers on your LANSettings Static Routing For Router Bs Default Route For Router As Default RouteFor the Load Balancer Gateways Routing Table Entry 1 SegmentSystem Status Operation and StatusOperation Device Data System StatusInformation Restore Factory Defaults Restore Factory DefaultsWAN Status WAN StatusData NAT Status NAT StatusMisc ErrorsNAT Connections CE Marking Warning SpecificationsFCC Statement Checking TCP/IP Settings Windows 9x/ME Windows TCP/IP SetupOverview TCP/IP Settings Using Dhcp Select Control Panel Network and Dial-up Connection Checking TCP/IP Settings WindowsUsing a fixed IP Address Use the following IP Address Network Configuration Windows XP Checking TCP/IP Settings Windows XPTCP/IP Properties Windows XP General Problems TroubleshootingInternet Access Problem 1 Cant connect to the Load Balancer to configure it