Bazooka RS8A-hp, RS10A-hp, RS6A-hp installation manual Power Wire, Ground Wire

Page 11

POWER WIRE

The 12 gauge red wire on the 2-pin power plug is the 12 Volt positive power wire. It must be fused and connected directly to the positive terminal of the battery to pro- vide a power source with a low voltage drop and low noise. Do not make the power connection at the fuse block or any point other than the battery. Improper power sources can reduce output and cause distortion.

The fuse holder should be connected to the battery's positive terminal. The fuse is designed to prevent fire or damage to your car, should the battery wire short to ground. Wait to insert the fuse into its holder until all wire connections have been made.

If it is necessary to lengthen the battery wire, add the required length between the amplifier and the fuse holder, not the fuse holder and the battery. Use 12 gauge or larger to extend the battery wire. It is best to use as short a wire as possible.

Be sure you DO NOT run the power wire next to the input cables of the amplifier, this will induce noise.

Avoid running the power wire near the radio's antenna or power leads, or near sensitive equipment or harnesses. The power wire carries substantial currents and could induce noise.

CAUTION

DO NOT substitute the 15 amp fuse included with the Amplified Bazooka with anything other than the same fast blow current rated fuse. Substitution or deletion will void the product's warranty and may cause damage to your car or the amplifier.

GROUND WIRE

The 12 gauge black wire on the 2-pin Molex Mini-fit Jr. connector is the negative ground wire. It must be connected directly to the vehicle chassis near the ampli- fier. We do not recommend extending the ground wire in any installation, as this can cause unwanted ground loops.

10

Image 11
Contents P l i f i e d Installation m a n u a l Congratulations Practice Safe Listening ContentsWarranty Specifications System FeaturesInstallation Installation TopBottom Mounting the BazookaMounting the Bazooka Technical Note Wiring Diagram Ground Wire Power WireOption One Remote Turn on OptionsAmplifier Status LED Amplifier Status LED AM I in PHASE?Adjusting Level Gain Control Adjusting the CrossoverCanada 604 988

RS8A-hp, RS6A-hp, RS10A-hp specifications

Bazooka has made significant strides in the automotive market, showcasing impressive subwoofer models such as the RS6A-hp, RS8A-hp, and RS10A-hp. These subwoofers are noted for their compact designs, robust construction, and advanced technologies, making them suitable for both seasoned audiophiles and casual listeners alike. The RS series aims to deliver premium sound quality while maintaining an easy installation process, proving that power and convenience can coexist.

The RS6A-hp features a 6.5-inch high-performance subwoofer driver, engineered to produce clean and powerful bass. This model incorporates a high-temperature voice coil, allowing it to handle increased power without distortion. Additionally, the innovative spider design enhances excursion and improves sound clarity by reducing unwanted vibrations. With a frequency response range that extends well into the lower register, the RS6A-hp ensures that every note is heard, from the deep rumble of a kick drum to the punch of bass lines.

Moving up, the RS8A-hp boasts an 8-inch driver, providing an even richer sound experience. One of its standout features is the dual voice coil configuration, which offers flexibility in wiring options and allows for a customized setup to fit various amplifier configurations. The enclosure is designed with optimal airspace calculations, ensuring that sound output is maximized while minimizing unwanted resonance. Durable materials in both the cone and surround contribute to the overall longevity of this model.

For those who desire the ultimate in performance, the RS10A-hp delivers with its 10-inch woofer. This powerhouse subwoofer is designed for serious bass enthusiasts who crave deep, thunderous lows. The RS10A-hp is equipped with advanced cooling technology, which prevents overheating during extended use, making it ideal for loud volume applications. Moreover, its high-efficiency design means that it can produce concert-level sound without taxing the amplifier, creating a seamless listening experience.

All models in the Bazooka RS series prioritize user-friendliness, featuring plug-and-play connectors and adjustable settings for gain and crossover frequency. These features make it easy to integrate the subwoofers into existing audio systems, providing users with flexibility and control over their sound profile. Compact yet powerful, the Bazooka RS6A-hp, RS8A-hp, and RS10A-hp stand out as exemplary options for anyone looking to enhance their vehicle’s audio system or home theater setup. With their innovative technologies and carefully crafted designs, these subwoofers promise to elevate sound experiences to new heights.