Amplifier Status LED

TURN ON OPTIONS CONT.

and middle pins to enable the Auto Turn-On feature. This can be done easily with a pair of needle nose pliers. With the jumper in the Auto position, the Amplified Bazooka will turn on automatically when it senses any music. The ORANGE wire should not be connected to anything if this feature is being used. Be sure to insulate the end of the ORANGE wire so that it will not short to ground, as this may damage the Amplified Bazooka.

The white color LED on the Amplified Bazooka will light up GREEN when power, ground and remote are all connected properly. If it lights up RED, the Amplified Bazooka is in pro- tection mode which can indicate a short in the wiring or a problem with the amplifier.

INPUT SIGNAL CONNECTIONS

Should I Use High or Low Level Inputs?

If the source unit has only speaker outputs, use the high-level inputs of the Amplified Bazooka. If the source unit has both high and low level outputs, we recommend using the high level inputs over the low level inputs, due to the configuration of the Amplified Bazooka's balanced input circuit. PLEASE NOTE THAT THE WIRING IN A FACTO-

RY STEREO MAY NOT BE ELECTRICALLY IN PHASE EVEN WHEN YOU HAVE MADE THE PROPER CONNECTIONS. Take the time after you make your wire connections to run through the quick phase check procedure in the AM I IN PHASE? Section of this manual. NEVER USE BOTH high and low-level inputs at the same time!

High-Level Inputs:

If the source unit has both front and rear speaker outputs, use only one set of speak- er outputs for the high-level input of the Amplified Bazooka. Connect the GREEN wire from the 14-pin Molex plug of the Amplified Bazooka to the source units left (+) pos- itive speaker output. Connect the GREEN W/BLACK stripe wire of the plug to the source units left (-) negative speaker output. Connect the GRAY wire of the plug to the source units right (+) positive speaker output. Connect the GRAY W/BLACK stripe wire of the plug to the source units right (-) negative speaker output.

RS8A-hp, RS6A-hp, RS10A-hp specifications

Bazooka has made significant strides in the automotive market, showcasing impressive subwoofer models such as the RS6A-hp, RS8A-hp, and RS10A-hp. These subwoofers are noted for their compact designs, robust construction, and advanced technologies, making them suitable for both seasoned audiophiles and casual listeners alike. The RS series aims to deliver premium sound quality while maintaining an easy installation process, proving that power and convenience can coexist.

The RS6A-hp features a 6.5-inch high-performance subwoofer driver, engineered to produce clean and powerful bass. This model incorporates a high-temperature voice coil, allowing it to handle increased power without distortion. Additionally, the innovative spider design enhances excursion and improves sound clarity by reducing unwanted vibrations. With a frequency response range that extends well into the lower register, the RS6A-hp ensures that every note is heard, from the deep rumble of a kick drum to the punch of bass lines.

Moving up, the RS8A-hp boasts an 8-inch driver, providing an even richer sound experience. One of its standout features is the dual voice coil configuration, which offers flexibility in wiring options and allows for a customized setup to fit various amplifier configurations. The enclosure is designed with optimal airspace calculations, ensuring that sound output is maximized while minimizing unwanted resonance. Durable materials in both the cone and surround contribute to the overall longevity of this model.

For those who desire the ultimate in performance, the RS10A-hp delivers with its 10-inch woofer. This powerhouse subwoofer is designed for serious bass enthusiasts who crave deep, thunderous lows. The RS10A-hp is equipped with advanced cooling technology, which prevents overheating during extended use, making it ideal for loud volume applications. Moreover, its high-efficiency design means that it can produce concert-level sound without taxing the amplifier, creating a seamless listening experience.

All models in the Bazooka RS series prioritize user-friendliness, featuring plug-and-play connectors and adjustable settings for gain and crossover frequency. These features make it easy to integrate the subwoofers into existing audio systems, providing users with flexibility and control over their sound profile. Compact yet powerful, the Bazooka RS6A-hp, RS8A-hp, and RS10A-hp stand out as exemplary options for anyone looking to enhance their vehicle’s audio system or home theater setup. With their innovative technologies and carefully crafted designs, these subwoofers promise to elevate sound experiences to new heights.