Bazooka RS8A-hp, RS10A-hp, RS6A-hp installation manual AM I in PHASE?, Amplifier Status LED

Page 14

Phase Alert

When one of the Amplified Bazooka's High-level Input channels is out of phase elec- trically with the other High-level Input channel your Bazooka will sound as if it has lit- tle or no output, and any output that is produced may sound distorted. If you suspect that your Bazooka is out of phase, use the AM I IN PHASE procedure to diagnose and correct the Bazookas' output, and proper bass response will be produced.

AM I IN PHASE?

If your inputs are out of phase and you turn the balance control of your radio all the way to one side, right or left, the bass output from the Bazooka will increase. When you bring the balance control back to the center position the bass level will drop. This confirms that one of your input channels is wired out of phase with the other. To correct this situation, simply reverse the connections on one of the two input chan- nels. When the wiring is in correct electrical phase, the level of bass output will be greatest when the balance control of the radio is set to the center position.

LOW-LEVEL INPUT:

If your source unit only has low-level RCA phono jack output, use only the low-level inputs of the Amplified Bazooka.

Connect the low-level RCA phono jack inputs of the Amplified Bazooka to the source with a shielded RCA patch cord. To avoid possible noise problems, be sure to run the patch cord away from all power wires and factory wire harnesses.

When using the low-level inputs DO NOT make any connections to the Green and Gray high-level input wires of the Amplified Bazooka and make sure these wires are insulated to avoid the possibility of a short circuit.

AMPLIFIER STATUS LED

WHITE = OFF

GREEN = NORMAL OPERATION

RED = PROTECTION MODE

13

Image 14
Contents P l i f i e d Installation m a n u a l Congratulations Practice Safe Listening ContentsWarranty System Features SpecificationsInstallation Installation Mounting the Bazooka TopBottomMounting the Bazooka Technical Note Wiring Diagram Power Wire Ground WireRemote Turn on Options Option OneAmplifier Status LED AM I in PHASE? Amplifier Status LEDAdjusting the Crossover Adjusting Level Gain ControlCanada 604 988

RS8A-hp, RS6A-hp, RS10A-hp specifications

Bazooka has made significant strides in the automotive market, showcasing impressive subwoofer models such as the RS6A-hp, RS8A-hp, and RS10A-hp. These subwoofers are noted for their compact designs, robust construction, and advanced technologies, making them suitable for both seasoned audiophiles and casual listeners alike. The RS series aims to deliver premium sound quality while maintaining an easy installation process, proving that power and convenience can coexist.

The RS6A-hp features a 6.5-inch high-performance subwoofer driver, engineered to produce clean and powerful bass. This model incorporates a high-temperature voice coil, allowing it to handle increased power without distortion. Additionally, the innovative spider design enhances excursion and improves sound clarity by reducing unwanted vibrations. With a frequency response range that extends well into the lower register, the RS6A-hp ensures that every note is heard, from the deep rumble of a kick drum to the punch of bass lines.

Moving up, the RS8A-hp boasts an 8-inch driver, providing an even richer sound experience. One of its standout features is the dual voice coil configuration, which offers flexibility in wiring options and allows for a customized setup to fit various amplifier configurations. The enclosure is designed with optimal airspace calculations, ensuring that sound output is maximized while minimizing unwanted resonance. Durable materials in both the cone and surround contribute to the overall longevity of this model.

For those who desire the ultimate in performance, the RS10A-hp delivers with its 10-inch woofer. This powerhouse subwoofer is designed for serious bass enthusiasts who crave deep, thunderous lows. The RS10A-hp is equipped with advanced cooling technology, which prevents overheating during extended use, making it ideal for loud volume applications. Moreover, its high-efficiency design means that it can produce concert-level sound without taxing the amplifier, creating a seamless listening experience.

All models in the Bazooka RS series prioritize user-friendliness, featuring plug-and-play connectors and adjustable settings for gain and crossover frequency. These features make it easy to integrate the subwoofers into existing audio systems, providing users with flexibility and control over their sound profile. Compact yet powerful, the Bazooka RS6A-hp, RS8A-hp, and RS10A-hp stand out as exemplary options for anyone looking to enhance their vehicle’s audio system or home theater setup. With their innovative technologies and carefully crafted designs, these subwoofers promise to elevate sound experiences to new heights.