User’s Manual
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.
The power cord should be connected.
Connect the Signal cable from the monitor to the VGA card.
Press the power button to turn on the monitor. The power indicator will light up.
Menu / Enter
▲
Left navigate/Brightness adjustment button
▼
Right navigate
Auto adjustment / Return
Input source change (Press 5 seconds)
Power Button
Figure.4. Control Panel Buttons
12