User’s Manual
ERROR MESSAGE & POSSIBLE SOLUTIONS
CABLE NOT CONNECTED :
1.Check that the
2.Check the
INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.
RECOMMENDED AND SUPPORTED TIMING MODE:
(Analog / Digital mode)
| MODE | RESOLUTION |
| 1 | 640×480 @60Hz |
| 2 | 640×480 @75Hz |
| 3 | 800×600 @56Hz |
| 4 | 800×600 @60Hz |
| 5 | 800×600 @72Hz |
| 6 | 800×600 @75Hz |
| 7 | 1024×768 @60Hz |
| 8 | 1024×768 @70Hz |
| 9 | 1024×768 @75Hz |
| 10 | 1280×1024 @60Hz |
| 11 | 1280×1024 @75Hz |
| 12 | 1680×1050 @60Hz |
(YPbPr mode) |
| |
| MODE | RESOLUTION |
| 1 | 720x480i @60Hz |
| 2 | 720x480p @60Hz |
| 3 | 720x576i @50Hz |
| 4 | 720x576p @50Hz |
| 5 | 1280×720p @50Hz |
| 6 | 1280×720p @60Hz |
| 7 | 1920×1080i @60Hz |
| 8 | 1920×1080p @60Hz |
| 9 | 1920×1080i @50Hz |
10 | 1920×1080p @50Hz | |
*** The picture performance at 480i,576i or 1080i is not guaranteed.
20