Making Connections, Connecting to a PC

User’s Manual

MAKING CONNECTIONS

CONNECTING TO A PC:

Turn off your computer before performing the steps below.

1.Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

2.Connect one end of the DVI-D cable (Dual input mode optional) to the back of the monitor and connect the other end to the computer’s DVI-D port.

3.Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

4.Connect one end of the USB cable to the back of the monitor and connect the other end to the computer's USB port. Then you can connect any USB devices (with Type A connector) via the four USB ports on the right side of the monitor.

5.Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet.

6.Turn on your monitor and computer.

Figure 2: Connecting to a PC

1.	USB Port (Type B)	2.	AC Power Input
3.	Line In Input	4.	DVI / YPbPr Input
5.	VGA Input	6.	USB Ports (Type A)