6.OPTIONAL: Press the LEARN button on the Receiver for 2 seconds to exit “Learn Mode.” Otherwise, after five minutes, Learn Mode will automatically time out.
If more than one device is being installed on the same system, place the Receiver into Learn Mode (step 4 above) only once, then “Teach” each device before exiting Learn Mode. Do not push the LEARN button on the receiver for each device to be added. (See “Installing 3 or More Devices” on page 13.)
After the Teach/Learn sequence is performed, the receiver and the device will remain synchronized after powering down and changing channels. It is only necessary to perform the Teach/Learn sequence when setting a device up for the first time or when adding additional devices to the system.
When the Receiver is put into Learn Mode, it erases its memory of previously learned devices and looks for new devices. Therefore, when adding a new device to a system it is necessary to put the Receiver into Learn Mode then Teach all devices that will be used on the system.
To Determine Which Channel the Keyboard is Using
The Gyration Keyboard has eight individual channels available to it. To determine which channel a device is currently using:
1.Press and quickly release the CHANNEL button on the keyboard. Count the number of times the green LED light on the top of the keyboard flashes. The number of flashes indicates the channel the keyboard is using.
Note: If the keyboard’s channel is changed when the computer is powered down or the receiver is not connected, the devices will become unsynchronized. When the system is running, click and release the channel button as described above to initiate a “channel confirm” operation. The keyboard broadcasts a message across all eight channels that informs the receiver what channel it is currently operating on. The receiver then automatically restores synchronization.
8