Gyration GyroRemote and Mobile RF Keyboard user manual Gyration Mobile Keyboard

Page 9

Gyration Mobile Keyboard

To Set Up and Synchronize the Keyboard with the Receiver

1.Power on your computer and connect the Receiver USB cable into an available USB port on your computer.

2.Follow standard USB device installation screens.

3.Insert 4 AAA batteries into the Keyboard.

4.Press and hold the LEARN button on the Receiver for 2 seconds. The STATUS light will blink slowly, indicating that the receiver is in “Learn Mode.”

5.Press the TEACH button on the Gyration keyboard (see illustration above). The status light on the Receiver will blink rapidly for 4 sec- onds, then will blink slowly. Push the “Teach” button on any addi- tional devices (i.e. GyroRemote or 2nd Keyboard) at this time.

7

Image 9

Contents GyroRemote Mobile RF Keyboard Spec GyroRemote Keyboard RF Receiver Product SpecificationsGyroRemote To Set Up and Synchronize the GyroRemote and the ReceiverGyroTools Software To Change the Channel GyroRemote is Using To Determine Which Channel GyroRemote is UsingUsing GyroRemote Installing or Replacing the Batteries Powering Off GyroRemoteFine-tuning Cursor Control Gyration Mobile Keyboard To Set Up and Synchronize the Keyboard with the ReceiverTo Determine Which Channel the Keyboard is Using Powering Off the Keyboard To Change the Channel the Keyboard is UsingKey Program Function Support Special Keyboard Media KeysWin Microsoft Stops the loading process Gyration RF Receiver Learn ButtonStatus LED Installing 3 or More Devices Keyboard Status LEDsConflict LED Page Symptom Reason Solution GyroRemote Troubleshooting TipsKeyboard Troubleshooting Tips FCC Statement Regulatory InformationCanadian Radio Interference Regulations Contacting Gyration Warranty InformationPage United States, Brazil, Canada, Israel International Radio CompatibilityPA00169-001 Rev. C