Gyration GyroRemote and Mobile RF Keyboard To Determine Which Channel GyroRemote is Using

Page 5

To Determine Which Channel GyroRemote is Using

GyroRemote has eight individual channels available to it. To determine which channel a device is currently using:

1.Press and quickly release the CHANNEL button on the GyroRemote handset. Count the number of times the green LED light on the top of the handset flashes. The number of flashes indicates the channel the handset is using.

Note: If GyroRemote’s channel is changed when the computer is powered down or the receiver is not connected, the devices will become unsynchronized. When the system is running, click and release the channel button as described above to initiate a “channel confirm” operation. GyroRemote broadcasts a message across all eight channels that informs the receiver what channel it is currently operating on. The receiver then automatically restores synchronization.

To Change the Channel GyroRemote is Using

When two devices are being used in the same proximity, each device should be set to operate on a unique channel.

To change the channel:

1.Press and hold the CHANNEL button on the GyroRemote handset for 2 seconds. When you release the button, GyroRemote will change to the next channel and the green LED will flash. The number of times the green LED flashes indicates the new channel the handset is using.

If a Teach/Learn sequence has already been performed, it will not be necessary to re-synchronize the devices after a channel change.

Tip: If you are installing three or more devices on a single receiver, see “Installing 3 or More Devices” on page 13.

3

Image 5
Contents GyroRemote Mobile RF Keyboard Spec GyroRemote Keyboard RF Receiver Product SpecificationsGyroRemote To Set Up and Synchronize the GyroRemote and the ReceiverGyroTools Software To Change the Channel GyroRemote is Using To Determine Which Channel GyroRemote is UsingUsing GyroRemote Installing or Replacing the Batteries Powering Off GyroRemoteFine-tuning Cursor Control Gyration Mobile Keyboard To Set Up and Synchronize the Keyboard with the ReceiverTo Determine Which Channel the Keyboard is Using Powering Off the Keyboard To Change the Channel the Keyboard is UsingKey Program Function Support Special Keyboard Media KeysWin Microsoft Stops the loading process Status LED Gyration RF ReceiverLearn Button Conflict LED Installing 3 or More DevicesKeyboard Status LEDs Page Symptom Reason Solution GyroRemote Troubleshooting TipsKeyboard Troubleshooting Tips FCC Statement Regulatory InformationCanadian Radio Interference Regulations Contacting Gyration Warranty InformationPage United States, Brazil, Canada, Israel International Radio CompatibilityPA00169-001 Rev. C