Futuretech 250 user manual Master/Slave-operation, Blackout-socket

Page 10

Caution: Devices in hanging installations may cause severe injuries when crashing down! If you have doubts concerning the safety of a possible installation, do NOT install the device!

Before rigging make sure that the installation area can hold a minimum point load of 10 times the device's weight.

DANGER OF FIRE!

When installing the device, make sure there is no highly-inflammable material (decoration articles, etc.) within a distance of min. 0.5 m.

Mount the device to your trussing system using an appropriate clamp.

For overhead use, always install a safety-rope that can hold at least 12 times the weight of the fixture. You must only use safety-ropes with quick link with screw cap. Pull the safety-rope through the attachment eyelet and over the trussing system or a safe fixation spot. Insert the end in the quick link and tighten the safety screw.

The maximum drop distance must never exceed 20 cm.

A safety rope which already hold the strain of a crash or which is defective must not be used again.

Adjust the desired inclination-angle via the mounting-bracket and tighten the fixation screws.

DANGER TO LIFE!

Before taking into operation for the first time, the installation has to be approved by an expert!

Master/Slave-operation

The master/slave-operation enables that several devices can be synchronized and controlled by one master- device.

On the rear panel of the DJ-SCAN 250 you can find an XLR-jack (DMX Out) and an XLR-plug (DMX In), which can be used for connecting several devices.

Choose the device which is to control the effects. This device then works as master-device and controls all other slave-devices, which are to be connected to the master-device via a balanced microphone lead. Connect the DMX OUT-jack with the DMX IN-plug of the next device.

Set the desired Master-mode for the master-device. Set the respective Slave-mode for all slave-devices.

Blackout-socket

If you wish to lock the light output - e.g. via an optional footswitch (Blackout-mode), connect your footswitch via a mono-jack plug to the Blackout-socket.

10/1551839250X62NXS_V_1_1_E.DOC

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DJ-SCAN MULTI-LANGUAGE-INSTRUCTIONS Conexión al controlador DMX / conexión proyector proyector Safety Instructions IntroductionOperating Determinations Health HazardDescription of the Device FeaturesInnovative DJ-scanner with rotating gobos Overview Procedure InstallationInstalling/Replacing the lamp Do not operate this device with opened coverLamp adjustment Overhead riggingMaster/Slave-operation Blackout-socketOccupation of the XLR-connection DMX-512 connection / connection between fixturesConnection with the mains Building a serial DMX-chainDMX-controlled operation OperationStand Alone operation AddressingControl channel 2 Vertical movement Tilt DMX-protocolControl channel 1 Horizontal movement Pan Control channel 3 Colour-wheelControl channel 5 Gobo rotation Cleaning and MaintenanceControl channel 6 Shutter, strobe Replacing the fuse Technical SpecificationsBefore replacing the fuse, unplug mains lead Procedure Fitting lamps

250 specifications

Futuretech 250 is an innovative platform that embodies the cutting-edge of technological advancements, focusing on a blend of artificial intelligence, advanced robotics, and seamless connectivity. Designed to cater to various industries, including healthcare, manufacturing, and smart cities, the Futuretech 250 is set to redefine operational efficiency and user experience.

One of the standout features of the Futuretech 250 is its integration of artificial intelligence (AI). This technology empowers the platform to analyze vast amounts of data in real time, offering predictive analytics that can enhance decision-making processes across various sectors. By leveraging machine learning algorithms, the Futuretech 250 can adapt and evolve, providing tailored solutions that meet the unique needs of each industry.

Another key characteristic of the Futuretech 250 is its advanced robotics capabilities. The platform is equipped with a fleet of collaborative robots, or cobots, which work alongside humans to perform tasks ranging from assembly line work to assisting in surgeries. These robots are designed for flexibility and safety, making them suitable for environments where human-robot interaction is frequent.

In addition to AI and robotics, the Futuretech 250 thrives on its seamless connectivity. With the Internet of Things (IoT) at its core, the platform ensures that devices and systems within a facility can communicate effectively. This connectivity leads to improved resource management, as real-time data flow can monitor equipment health and energy consumption, ultimately driving sustainability efforts.

Safety and security are also paramount within the Futuretech 250 framework. Built with robust cybersecurity measures, the platform protects sensitive data from potential threats, thus ensuring operational integrity. Furthermore, its user-centric design prioritizes ease of use, making it accessible for professionals at all levels, from technicians to executives.

The Futuretech 250 is not just about enhancing efficiency; it is also about fostering innovation. By providing an ecosystem where companies can integrate and test new technologies, it encourages experimentation and collaboration, paving the way for next-generation solutions.

In conclusion, Futuretech 250 is a holistic platform that merges AI, robotics, and IoT to transform industries. Its features, ranging from data analytics to collaborative robotics, make it a powerful tool for businesses looking to thrive in an increasingly digital world. As industries continue to evolve, the Futuretech 250 stands at the forefront, ready to lead the charge into a more connected and efficient future.
Top Page Image Contents