Lamp adjustment, Overhead rigging | Futuretech 250 guide

Lamp adjustment

The lampholder is aligned at the factory. Due to differences between lamps, fine adjustment may improve light performance.

Strike the lamp, open the shutter, set the dimmer intensity to 100 % and focus the light on a flat surface (wall). Center the hot-spot (the brightest part of the beam) using the 3 adjustment screws "A, B, C”. Turn one screw at a time to drag the hot-spot diagonally across the projected image. If you cannot detect a hot- spot, adjust the lamp until the light is even.

To reduce a hot-spot, pull the lamp in by turning all three screws "A, B, C” clockwise ¼-turn at a time until the light is evenly distributed.

If the light is brighter around the edge than it is in the center, or if light output is low, the lamp is too far back in the reflector. "Push” the lamp out by turning the screws "A, B, C” counterclockwise ¼-turn at a time the light is bright and evenly distributed.

Overhead rigging

DANGER TO LIFE!

Please consider the DIN 15560 and the respective national norms during the installation! The installation must only be carried out by an authorized dealer!

The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation.

The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.

When rigging, derigging or servicing the device staying in the area below the installation place, on bridges, under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking into operation for the first time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by an expert after every four year in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once a year.

Procedure:

The device should be installed outside areas where persons may walk by or be seated.

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to) calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the device. If you lack these qualifications, do not attempt the installation yourself, but instead use a professional structural rigger. Improper installation can result in bodily injury and or damage to property.

The device has to be installed out of the reach of people.

If the device shall be lowered from the ceiling or high joists, professional trussing systems have to be used. The device must never be fixed swinging freely in the room.

9/1551839250X62NXS_V_1_1_E.DOC

250 specifications

Futuretech 250 is an innovative platform that embodies the cutting-edge of technological advancements, focusing on a blend of artificial intelligence, advanced robotics, and seamless connectivity. Designed to cater to various industries, including healthcare, manufacturing, and smart cities, the Futuretech 250 is set to redefine operational efficiency and user experience.

One of the standout features of the Futuretech 250 is its integration of artificial intelligence (AI). This technology empowers the platform to analyze vast amounts of data in real time, offering predictive analytics that can enhance decision-making processes across various sectors. By leveraging machine learning algorithms, the Futuretech 250 can adapt and evolve, providing tailored solutions that meet the unique needs of each industry.

Another key characteristic of the Futuretech 250 is its advanced robotics capabilities. The platform is equipped with a fleet of collaborative robots, or cobots, which work alongside humans to perform tasks ranging from assembly line work to assisting in surgeries. These robots are designed for flexibility and safety, making them suitable for environments where human-robot interaction is frequent.

In addition to AI and robotics, the Futuretech 250 thrives on its seamless connectivity. With the Internet of Things (IoT) at its core, the platform ensures that devices and systems within a facility can communicate effectively. This connectivity leads to improved resource management, as real-time data flow can monitor equipment health and energy consumption, ultimately driving sustainability efforts.

Safety and security are also paramount within the Futuretech 250 framework. Built with robust cybersecurity measures, the platform protects sensitive data from potential threats, thus ensuring operational integrity. Furthermore, its user-centric design prioritizes ease of use, making it accessible for professionals at all levels, from technicians to executives.

The Futuretech 250 is not just about enhancing efficiency; it is also about fostering innovation. By providing an ecosystem where companies can integrate and test new technologies, it encourages experimentation and collaboration, paving the way for next-generation solutions.

In conclusion, Futuretech 250 is a holistic platform that merges AI, robotics, and IoT to transform industries. Its features, ranging from data analytics to collaborative robotics, make it a powerful tool for businesses looking to thrive in an increasingly digital world. As industries continue to evolve, the Futuretech 250 stands at the forefront, ready to lead the charge into a more connected and efficient future.