Operation, Stand Alone operation, Addressing

The occupation of the connection-cables is as follows:

Cable	Pin	International
Brown	Live	L
Blue	Neutral	N
Yellow/Green	Earth
Yellow/Green	Earth

The earth has to be connected!

If the device will be directly connected with the local power supply network, a disconnection switch with a minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.

Lighting effects must not be connected to dimming-packs.

OPERATION

After you connected the effect to the mains, the DJ-SCAN 250 starts running. During the Reset, the motors are trimmed and the device is ready for use afterwards.

Turn the objective-lens for adjusting the focus in order to obtain a sharp projection.

Stand Alone operation

In the Stand Alone mode, the DJ-SCAN 250 can be used without controller. You can do without a controller as the DJ-SCAN 250 features a built-in microphone, which provides automatic sound control.

Disconnect the DJ-SCAN 250 from the controller and select "Master Mode: Sound-control".

If you have connected a footswitch to the Blackout-socket, you can lock the light output (Blackout-mode) and turn it on again.

Master/Slave-operation

Connect the master and slave-devices and adjust the settings as desribed above.

Please note: If you wish to change from one operating mode into another, you have to unplug the projector from the mains and plug it again.

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different occupation with different features. In order to call up the different features, you first have to open the shutter (control channel 6, DMX-value 132-139 or 250-255) or set the dimmer to the desired intensity (control channel 6, DMX-value 6-128).

Addressing

The Control Board on the front side of the base allows you to assign the DMX fixture address, which is defined as the first channel from which the DJ-SCAN 250 will respond to the controller.

If you set, for example, the address to channel 7, the DJ-SCAN 250 will use the channel 7 to 14 for control. Please, be sure that you don’t have any overlapping channels in order to control each DJ-SCAN 250 correctly and independently from any other fixture on the DMX data link.

If two, three or more DJ-SCAN 250 are addressed similarly, they will work similarly.

For address setting, press the Mode-button until the display shows "d" and set the desired address via the Up/Down-buttons.

Controlling:

After having addressed all DJ-SCAN 250, you may now start operating these via your lighting controller.

12/1551839250X62NXS_V_1_1_E.DOC

250 specifications

Futuretech 250 is an innovative platform that embodies the cutting-edge of technological advancements, focusing on a blend of artificial intelligence, advanced robotics, and seamless connectivity. Designed to cater to various industries, including healthcare, manufacturing, and smart cities, the Futuretech 250 is set to redefine operational efficiency and user experience.

One of the standout features of the Futuretech 250 is its integration of artificial intelligence (AI). This technology empowers the platform to analyze vast amounts of data in real time, offering predictive analytics that can enhance decision-making processes across various sectors. By leveraging machine learning algorithms, the Futuretech 250 can adapt and evolve, providing tailored solutions that meet the unique needs of each industry.

Another key characteristic of the Futuretech 250 is its advanced robotics capabilities. The platform is equipped with a fleet of collaborative robots, or cobots, which work alongside humans to perform tasks ranging from assembly line work to assisting in surgeries. These robots are designed for flexibility and safety, making them suitable for environments where human-robot interaction is frequent.

In addition to AI and robotics, the Futuretech 250 thrives on its seamless connectivity. With the Internet of Things (IoT) at its core, the platform ensures that devices and systems within a facility can communicate effectively. This connectivity leads to improved resource management, as real-time data flow can monitor equipment health and energy consumption, ultimately driving sustainability efforts.

Safety and security are also paramount within the Futuretech 250 framework. Built with robust cybersecurity measures, the platform protects sensitive data from potential threats, thus ensuring operational integrity. Furthermore, its user-centric design prioritizes ease of use, making it accessible for professionals at all levels, from technicians to executives.

The Futuretech 250 is not just about enhancing efficiency; it is also about fostering innovation. By providing an ecosystem where companies can integrate and test new technologies, it encourages experimentation and collaboration, paving the way for next-generation solutions.

In conclusion, Futuretech 250 is a holistic platform that merges AI, robotics, and IoT to transform industries. Its features, ranging from data analytics to collaborative robotics, make it a powerful tool for businesses looking to thrive in an increasingly digital world. As industries continue to evolve, the Futuretech 250 stands at the forefront, ready to lead the charge into a more connected and efficient future.