Cable Restraint Information

Ground to Vehicle Chassis

Figure 2

14 AWG (black wire) J1128 TYPE GPT

-	+	10"	Fuse

Vehicle Battery

Connect in-line fuse holder to lead wire using Panduit #BSN14-C Butt Splice connectors

Panduit #BSN14-C Butt Splice connects to black lead from dock

Panduit #BSN14-C Butt Splice connects to red or blue lead from dock

14 AWG (red wire) J1128 TYPE GPT

Attach the supplied cable tie anchors to the underside of the dock by pushing into the holes in the locations shown (Figure 3).

Attach cable ties to the anchors as shown (Figure 3).

Retain the USB and Ethernet cables at the Support Bracket using the supplied cable ties (Figure 3). If the USB or Ethernet cables do not fit with the Support Bracket, remove the bracket and restrain the cables with the additional tie wrap anchors supplied in the hardware bag.

USB/Ethernet

Support Bracket

Figure 3

Assemble cable ties to the anchors and route cables as required

Page 6of 8