Hardware Installation
1 - Floppy Cable
Used to attach a floppy drive to the motherboard.
1 -
Allows a Molex power connector to adapt to a
SATA power connector.
2 - SATA Signal Cable
Used to support the Serial ATA protocol and each one connects a single drive to the motherboard.
1 -
Passes data between the IDE connection on the motherboard and IDE device.
1 - Driver Installation CD
Contains drivers and software needed to setup the motherboard.
EVGA nForce 730i
Motherboard
The EVGA nForce 730i motherboard with the NVIDIA GeForce 9300/nForce 730i single chip is a PCI Express, NVIDIA GeForce Boost Technology ready motherboard. Figure 1 shows the motherboard and Figures 2 shows the back panel connectors.