USB Headers
This motherboard contains four (4) USB 2.0 ports that are exposed on the rear panel of the chassis (Figure 2). The motherboard also contains four
1.Secure the bracket to either the front or rear panel of your chassis (not all chassis are equipped with the front panel option).
2.Connect the two ends of the cables to the USB 2.0 headers on the motherboard.
Table 3. USB 2.0 Header Pins
Connector | Pin | Signal | Card Edge |
| 1 | 5V_DUAL |
|
USB 2.0 Header | 3 | Data- |
|
| 5 | Data+ |
|
| 7 | GND |
|
| 9 | Empty |
|
| Pin | Signal |
|
| 2 | 5V_DUAL |
|
| 4 | Data- |
|
| 6 | Data+ |
|
| 8 | GND |
|
| 10 | No Connect |
|