Configuring the BIOS
SATA SALP Features
This item allows you select the SATA SALP (Aggressive Link Power Management) status. The options are OFF, Partial, Slumber.
JMB363 ATA Controller
This function allows you to enable SATA controllers by JMicron JMB363 supported. The options are Enabled and Disabled.
JMB363 Mode
This is allows you set the Serial SATA mode by JMicron JMB363. The options are RAID, IDE and AHCI.
Onboard Devices
Press Enter to display the Onboard Devices menu.
HD Audio | [INT Codec + EXT Codec] |
MAC Lan | [Auto] |
P80 Show CPU Temperature | [Enabled] |
HD Audio
This item allows you to enable or disable the hard disk audio function. Options are Disabled, Internal Codec, External Codec, INT Codec + EXT Codec
MAC Lan
Use this function to set the MAC LAN to [Auto] or disable this function.
P80 Show CPU Temperature
When this function is enabled the Post Port LED will display the CPU’s current temperature. Options are Enabled and Disabled.
Legacy Devices
Press Enter to display the Legacy Devices menu.
Onboard | FDC Controller | [Enabled] |
Onboard | Serial Port 1 | [3F8/IRQ4] |