EPoX Computer specifications EP-3VCA2 Features

EP-3VCA2 Features

Section 2

FEATURES

EP-3VCA2 Features:

•EP-3VCA2 is based on the Socket 370 Processors including PPGA & FC- PGA operating at 300 ~ 800MHz.

•Designed with VIA Apollo Pro 133A PCIset.

•Supports up to 768MB of DRAM (minimum of 8 MB) on board (please see Section 3-2).

•EP-3VCA2 will support Error Checking and Correcting (ECC) when using parity SDRAM memory modules. This will detect multiple bit errors and correct 1-bit memory errors.

•Supports (5) 32 bit PCI slots, (1) 4X AGP slot, (1) AMR slot and provides

(2) independent high performance PCI IDE interfaces capable of supporting PIO Mode 3/4 and Ultra DMA 33/66 devices. The EP-3VCA2 supports (5) PCI Bus Master slots and a jumperless PCI INT# control scheme which reduces configuration confusion when plugging in PCI card(s).

•Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE interfaces.

•Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP, ECP), and (2) serial ports (16550 Fast UART).

Note: Japanese “Floppy 3 mode” is also supported

•Features Award Plug & Play BIOS. With Flash Memory you can always upgrade to the current BIOS as they are released. (http://www.epox.com/ please visit our Technical Support section for the latest updates).

•EP-3VCA2 utilizes a Lithium battery which provides environmental protection and longer battery life.

Page 2-1