EPoX Computer specifications Bios EP-3VCA2

Page 36

BIOS

EP-3VCA2

 

 

 

 

AGP-4X Mode: Chipset AGP Mode support.

Options: x1 , x2 and x4.

USB Keyboard Support: This controls the activation status of an optional USB keyboard that may be attached. The default is disabled.

Enabled: Enable USB keyboard support.

Disabled: Disable USB keyboard support.

OnChip Sound: Turn on/off onchip sound device.

OnChip Modem: Turn on/off onchip software modem device.

CPU to PCI Write Buffer: When enabled, up to four D words of data can be written to the PCI bus without interruting the CPU. When disabled, a write buffer is not used and the CPU read cycle will not be completed until the PCI bus signals that it is ready to receive the data.

The Choice: Enabled, Disabled.

PCI Dynamic Bursting: When Enabled, data transfers on the PCI bus, where possible, make use of the high-performance PCI bust protocol, in which graeater amounts of data are transferred at a single command.

The Choice: Enabled, Disabled.

PCI Master 0 WS Write: When Enabled, writes to the PCI bus are command with zero wait states.

The Choice: Enabled, Disabled.

PCI Delay Transaction: The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select Enabled to support compliance with PCI specification version 2.1.

The Choice: Enabled, Disabled.

PCI #2 Access #1 Retry: This item allows you enabled/disable the PCI #2 Access #1 Retry.

The Choice: Enabled, Disabled.

Memory Parity/ECC Check: If the DRAM chip in your system support Parity/ ECC check, select Enabled.

Page 4-10

Image 36
Contents EP-3VCA2 Handling Procedures User NoticeTechnical Support Services Contacting Technical SupportTable of Contents Appendix Appendix a Appendix BAppendix C Appendix DLeft Blank Components Checklist IntroductionSummary of ATX chassis features EP-3VCA2 Form-FactorShield Connector Power-On/Off RemoteSystem Block Diagram Socket ProcessorFeatures EP-3VCA2 FeaturesFeatures Installation InstallationEP-3VCA2 Detailed Layout Section CPU Insertion Installation Section Jumper Settings JP1JP4 Section System Memory Configuration Memory Layout DimmDimm Module Installation UnbufferedSection Device Connectors MODEM1 Telephony Connector Power On/Off Exclusive Keyboard Power on Function STR Suspend To RAM Function Sdram Bios Setup Main MenuBios EP-3VCA2 Standard Cmos SetupAdvanced Bios Features Bios Features SetupBios EP-3VCA2 EP-3VCA2 Bios Characters per second EP-3VCA2 Bios Advanced Chipset Features EP-3VCA2 Bios Bios EP-3VCA2 Integrated Peripherals Bios EP-3VCA2 EP-3VCA2 Bios BIOSEP-3VCA2 EP-3VCA2 Bios Power Management Setup System. Default is IRQ No IRQ is used 10 IRQ 11 IRQ Bios EP-3VCA2 PNP/PCI Configuration Bios EP-3VCA2 PC Health Status Frequency/Voltage Control Defaults Menu Supervisor/User Password Setting Enter PasswordExit Selecting Save & Exit Setup Save to Cmos and Exit Y/N? YExit Without Saving Quit without saving Y/N? YLeft Blank Appendix a AppendixTimer & DMA Channels MAP RTC & Cmos RAM MAP Appendix Appendix B Create resource map from Escd Program all onboard super I/O chips if any including Unexpected Errors Load Optimized Defaults Appendix CLeft Blank Appendix D Ghost 5.1 Quick User’s GuideAppendix EP-3VCA2 Appendix EP-3VCA2 Appendix EP-3VCA2 Appendix EP-3VCA2