EPoX Computer EP-3VCA2 specifications Power On/Off

EP-3VCA2 Installation

Device Connectors (continued)

(This is connected to the power button on the case. Using the Soft-Off by Pwr-BTTN feature, you can choose either Instant Off (turns system off immediatly), or 4 sec delay (you need to hold the button down for 4 seconds before the system turns off). When the system is in 4 sec delay mode, there is a special feature to make the system to go into suspend mode when the button is pressed momentarily).

J3	Power On/Off
	1
	Turbo LED indicator - LED ON when higher speed is selected
+	IDE LED indicator - LED ON when Onboard PCI IDE Hard disks
+	is activate
	IR Connector
	1. VCC	4. GND
	2. NC	5. IRTX
	3. IRRX
	1
J2	Power LED - Power LED connector
	1. Power LED(+)	4. NC
	2. N/C	5. GND
	3. GND
	1
	Speaker - Connect to the system's speaker for beeping
	1. Speaker	3. GND
	2. N/C	4. GND
	1
	Reset - Closed to restart system.
	1

Page 3-11