Operating Instructions |
Adjusting the OSD Settings
1.Press the MENU button to open the OSD window.
2.Press the < or > buttons until the desired function is highlighted.
3.Press MENU to open the function’s window.
4.Press the < or > buttons to change the settings of the function.
5.To save and exit, highlight the EXIT icon and press MENU or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps
Note: When the OSD window is open, the input signal timing settings appear at the top.
H:stands for horizontal frequency and
V:stands for vertical frequency.
12 | v1_081502 |