Envision Peripherals EN-5200E Before You Operate the Monitor, Adjusting the Viewing Angle

Page 7

Before You Operate the Monitor

EN-5200e

Adjusting the Viewing Angle

For optimal viewing, adjust the monitor's angle to your own preference.

•Hold the stand firmly when you change the monitor's angle.

•You can adjust the monitor's angle from -5° to 25°.

•Do not touch the LCD screen when you change the angle. It may cause damage or breakage.

•Be careful to avoid pinching your hand in the swivel base.

EN-5200e

7

31MY02

Image 7

Contents Inch TFT LCD Monitor User’s ManualFCC Statement For Your SafetyPrecautions Special Notes on LCD Monitors Using the Right Power CordGeneral Notes Package Contents Installing & Removing the Base General FeaturesBefore You Operate the Monitor EN-5200e Connecting the Wires Using the Power Cord Supplied Before You Operate the Monitor Adjusting the Viewing AngleBefore You Operate the Monitor EN-5200e Nstall An Optional Wall Mounting Arm Not Supplied Front Panel Buttons Operating InstructionsAdjusting the OSD Settings How to Install INF & ICM File Plug & Play DDC1/2B FeatureProblem Possible Solution Technical Support FAQError Message Possible Solution Resolution Vertical Pixels Frequency Resolution ChartAppendixEN-5200e SpecificationsOptimal Viewing Mode 1024 x 768 x 60 Hz Standard Resolution Horizontal Vertical Pixels Frequency Factory Preset Timing TablePin Number Description Connector Pin AssignmentLimited 3-Year Warranty Warranty