Envision Peripherals EN7220 user manual

EN7220

INSTALLATION INSTRUCTIONS (cont)

Preparing To Install The Optional Wall Mount Arm (Not Included)

This monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then dis-connect the cables from the monitor before performing the procedure below. Lay the monitor face down on a soft surface.

1.Remove the two rubber screw covers.

2.Remove the 2 screws that hold the plastic hinge cover.

3.Remove the plastic hinge cover.

4.Remove the small plastic cover. It is attached to the back of the monitor by hooks.

5.Remove the large plastic cover. It is attached to the back of the monitor by hooks.

6.Remove the 4 screws holding the stand to the back of the monitor.

7.Remove the stand.

11