Envision Peripherals AOC 9KLR user manual Precautions

Page 3

For Your Safety

AOC 9KLR

Precautions

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.

The monitor should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

Disconnect the power cord to stop the power supply to the monitor.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. As a safety feature, this plug will only fit into a grounded power outlet. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time.

This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous voltage and other hazards. Please refer all servicing to qualified service personnel.

To ensure satisfactory operation, use the monitor only with UL-listed computers which have appropriately configured receptacles marked between 100 - 240 V AC, Min. 3.5A.

The wall socket should be installed near the equipment and should be easily accessible.

AOC 9KLR

3

v3_123102

 

Image 3
Contents Inch Color Monitor User’s ManualFCC Statement For Your SafetyPrecautions General Notes Using the Right Power CordGeneral Features Package ContentsBefore You Operate the Monitor AOC 9KLR Installing & Removing the BaseConnecting the Wires Using the Power Cord Supplied Before You Operate the Monitor AOC 9KLR Front Panel Buttons Operating InstructionsAdjusting the OSD Settings Windows INF Driver File Plug & Play DDC1/2B FeatureBlue Technical Support FAQProblem Possible Solution OFFAppendix SpecificationsOptimal Viewing Mode 1280 x 1024 @ 85 Hz Factory Preset Timing Table StandardVGA Pin Number Description Connector Pin Assignment