Envision Peripherals user manual Before You Operate the Monitor AOC 9KLR

Page 7

Before You Operate the Monitor AOC 9KLR

Connecting the Wires Using An Optional Power Cord (Not Supplied)

The power cord supplied with your monitor can only be connected to a grounded electrical wall socket or power strip.

If you wish to connect your monitor to a power supply using the power input socket on the back of your computer, you must purchase a power cord with CEE-22 terminated connectors (see illustration above).

Follow these steps:

1.Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws.

2.Connect the power cord into your monitor's power input socket.

3.Plug the other end of the power cord into the power output socket on your PC.

AOC 9KLR

7

v3_123102

Image 7
Contents Inch Color Monitor User’s ManualFCC Statement For Your SafetyPrecautions General Notes Using the Right Power CordGeneral Features Package ContentsBefore You Operate the Monitor AOC 9KLR Installing & Removing the BaseConnecting the Wires Using the Power Cord Supplied Before You Operate the Monitor AOC 9KLR Front Panel Buttons Operating InstructionsAdjusting the OSD Settings Windows INF Driver File Plug & Play DDC1/2B FeatureBlue Technical Support FAQProblem Possible Solution OFFAppendix SpecificationsOptimal Viewing Mode 1280 x 1024 @ 85 Hz Standard Factory Preset Timing TableVGA Pin Number Description Connector Pin Assignment