Envision Peripherals EN-5200e/ei Connecting the Wires Using the Power Cord Supplied EN-5200ei

Before You Operate the Monitor EN-5200e/ei

Connecting the Wires Using the Power Cord Supplied (EN-5200ei)

1.Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws.

2.Connect the power cord to your monitor.

3.Plug the other end of the power cord into a grounded AC outlet or UL-approved power strip.

Caution: Make sure the power cord is the correct type that is required in your area. This LCD monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage areas (no user adjustment is required). If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

EN-5200e/ei 7 29JUL02