Emprex LM2203 user manual Button to exit the OSDmenu

4.The side effect of the Monitor Life-Extension function (why not preset Advanced Power Saving Mode as default?)

According to the request of EPA (USEnvironmental Protection Agency) to power management of monitors, the power consumption of the monitor must go down to below 3 watts within 3 seconds after the monitor steps in power saving mode. But the ifeL -Extension function decreases the electricity supplied to the backlights of LCD monitor gradually. Therefore, the Monitor Life-Extension function has conflict with the requirement of EPA in the first 7minutes after entering sleeping mode. Even though,comparing the advantages of both conditions, we still recommend you strongly to set your monitor in Advanced Power Saving mode.

5. l How to engage the Monitor Life-Extension function?

You may simply use the OSD control to activate the Monitor Life-Extension function.

1.Press arbitrarily 4 buttons (other than the Power Switch) on the left to activate the OSDmenu.

2.Press button to enter function menu.

3.	Press	<		or	<	button to select system	.
4.	Press	OK		to confirm the selection.
5.	Press	<		or	<	button to select POWER AVINGS ODEM		.
6.	Press	OK		to confirm the selection.
.7Press		<	or		<	button to select the advanced option		in the POWER AVINGS
	ODEM functions.
.8Press		OK		to confirm the selection.
.9Press		<button to exit the higher level menu.
10.Press the					button to exit the OSDmenu.

- 10-