Technical Features and Specifications
| Item |
| Description | |
Panel |
| Display Size | 464.94(H) x 290.59(V) mm | |
| Pixel Pitch | 0.27675(H) x 0.27675(V) mm | ||
|
| |||
Connector |
| Analog | ||
| Digital | |||
|
| |||
Tilt |
| Tilt Angle | ||
Dimensions |
| Net | About 510 W x 424Hx 202 D mm | |
(W x H x D) |
| |||
|
|
|
| |
Weight |
| Net | About 4.5kg | |
|
|
|
| |
Power |
| AC | AC 100~240V, 50Hz/60Hz,1.2A | |
|
|
|
| |
| Consumption | Active:<55W/Standby:<2W | ||
|
| |||
Operating |
| Temperature | 5°C to 40°C | |
| Humidity | 20% to 80% (No Condensation) | ||
Condition |
| |||
| Altitude | Under 10,000 fts | ||
|
| |||
Storage |
| Temperature | ||
| Humidity | 5% to 80% (No Condensation) | ||
Condition |
| |||
|
| Altitude | Under 40,000 fts | |
|
|
|
|
|
Interface Frequency
1.The following frequency range is the working period. If the entered mode between below period but not match the frequency of supported timing, display optimization would not be assured. If the entered mode is out of the working period, the display will be blanking (just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
2.Basically, mode judgment is regardless the sync polarity except both or more modes that are all belong to the supported timing list and could be judged by sync polarity only.
3.In the meantime, real entered frequency of the supported timing is not requested exactly.
4.Normalization of VGA card’ s deviation will be acceptable.
5. | Horizontal Frequency | 30 ~ 82KHz |
6. | Vertical Frequency | 56 ~ 76Hz |
- 8 -