Manuals / JVC / Home Audio / CD Player

JVC KD-LH2000R Specifications, Audio Amplifier Section, Tuner Section, Cd Player Section, General

Models: KD-LH2000R

1 58

Download 58 pages 56.5 Kb

Page 57

SPECIFICATIONS

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:	50 W per channel
Rear:	50 W per channel
Continuous Power Output (RMS):
Front:	19 W per channel into 4 Ω, 40 Hz
	to 20 000 Hz at no more than
	0.8% total harmonic distortion.
Rear:	19 W per channel into 4 Ω, 40 Hz
	to 20 000 Hz at no more than
	0.8% total harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Equalizer Control Range:
Low:	±06 (50 Hz, 80 Hz, 120 Hz)
Mid:	±06 (700 Hz, 1 kHz, 2 kHz)
High:	±06 (8 kHz, 12 kHz)

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kΩ load

Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range:
FM:	87.5 MHz to 108.0 MHz
AM:	(MW)	522 kHz to	1 620 kHz
	(LW)	144 kHz to	279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 ∝V/75 Ω)

50dB Quieting Sensitivity: 16.3 dBf (1.8 ∝V/75 Ω) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 ∝V

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 ∝V

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 recording format: MPEG 1/2 Audio Layer 3

Max. Bit Rate: 320 Kbps

	GENERAL
	GENERAL	ENGLISH
	Power Requirement:
	Operating Voltage: DC 14.4 V
	(11 V to 16 V allowance)
	Grounding System: Negative ground
	Allowable Operating Temperature: 0°C to +40°C
	Allowable Operating Temperature: 0°C to +40°C
	Dimensions (W ⋅ H ⋅ D):
	Installation Size: 182 mm ⋅ 52 mm ⋅ 150 mm
	Panel Size: 188 mm ⋅ 58 mm ⋅ 14 mm
	Mass: 1.4 kg (excluding accessories)
	Design and specifications are subject to change
	without notice.

Available characters

You can use the following characters to assign names to CDs, and external components (see page 42). In addition, these characters are used to display the information such as RDS, ID3v1 tags, DAB, and so on.

Numbers and symbols

Accented letters
Capital	Small

57

Image 57

JVC KD-LH2000R Specifications, Audio Amplifier Section, Tuner Section, Cd Player Section, General, Available characters

Contents

CD-RECEIVER RECEPTEUR CD CD-RECEIVER CD RECEIVERENGLISH DEUTSCH BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONSHow to use the MODE M button How to reset your unitPosition And Reproduction Of Labels ENGLISHMAINTENANCE CONTENTSSPECIFICATIONS ENGLISHLOCATION OF THE BUTTONS Control panelENGLISH ENGLISH Remote controllerInstalling the battery Preparing the remote controller1.Remove the battery holder 2.Place the batteryTo drop the volume in a moment Turning on the powerTo turn off the power BASIC OPERATIONSTo cancel the display demonstration, follow Changing the display patternPress DISP D see pages 36 and 2 Select “Off.”Listening to the radio RADIO OPERATIONSENGLISH 2 Start searching for a stationSearching for a station manually Manual search When an FM stereo broadcast is hard to receiveENGLISH 1 Select the band FM1 - 3, AM FM1 FM2 FM3 AMManual preset FM station automatic preset SSMStoring stations in memory ENGLISHSelecting a preset station directly Tuning in to a preset stationENGLISH 1 Select the band FM1 - 3, AM FM1 FM2 FM3 AMWhen receiving an AM or FM non-RDSstation Changing the display patternENGLISH Large animation displayWhat you can do with RDS RDS OPERATIONSTo use Network-TrackingReception ENGLISH5 Finish the setting Using TA Standby ReceptionENGLISH PSM see pages 36 and 2 Press 5 up or ∞5 Finish the setting Using PTY Standby ReceptionENGLISH PSM see pages 36 andENGLISH Searching for your favorite programmeTo search for your favorite programme type To store your favorite programme typesSetting the TA volume level Other convenient RDS functions and adjustments3 Start PTY search for your favoriteAutomatic clock adjustment PTY codesENGLISH Playing a CD CD OPERATIONSTo stop play and eject the disc ENGLISHSelecting CD playback modes Locating a track or a particular portion on a CDTo fast-forwardor reverse the track To go to the next or previous tracksTo cancel the prohibition and unlock the disc Prohibiting CD ejectionWhile pressing CD/CD-CH,press and hold for more than 2 secondsENGLISH Changing the display patternLarge animation display Small animation displayMP3 INTRODUCTION What is MP3?How are MP3 files recorded and played back? Compatible with ID3v1MP3 playback/search order MP3 directory/file configurationENGLISH HierarchyPlaying an MP3 disc MP3 OPERATIONSENGLISH 1 Open the control panelTo fast-forwardor reverse the file Selecting a directoryTo go to a particular directory directly To skip to the next or previous filesTo skip to the next directory Selecting MP3 playback modesTo skip to the previous directory ENGLISHIndicator To play back only intros Intro ScanIndicator IndicatorChanging the display pattern “File” indicatorENGLISH By pressing DISP D, you can change theAdjusting the sound SOUND ADJUSTMENTS2 Adjust the level 1 Select the item you want to adjustSelecting preset sound modes iEQ i-equalizer Storing your own sound adjustments3 Select the sound mode you want to adjust 4 Enter the sound adjustment mode5 Make adjustments as you like Sound adjustment itemsadjustment items.” 6 Exit from the sound adjustment modeLevel Meter Activating the level meterENGLISH Level MeterOTHER MAIN FUNCTIONS Basic Procedure3 Select the PSM item you want to adjust 6 Finish the settingTA Volume Preferred Setting Mode PSM itemsENGLISH MovieDemoTo select the dimmer mode-Dimmer To set the movie demo-MovieDemoTo select the scroll mode for disc information and the DAB text-ScrollTo change the FM tuner selectivity- IF Filter To adjust the display contrast level- ContrastTo turn on/off the key-touch tone-Beep ENGLISHChanging the display color Setting the desired color for each source-Source3 Select “Mode.” See pages 36 and10 Finish the setting Selecting or adjusting your own color- UserENGLISH Line In7 Adjust the user color 4 Select “User” as the “Mode” color mode setting9 Finish the setting ENGLISHTo erase the entered characters Assigning names to the sourcesENGLISH 4 Select a characterDetaching the control panel Detaching the control panelAttaching the control panel Note on cleaning the connectorsPlaying CDs CD CHANGER OPERATIONSTo change the information shown on the display ENGLISHTo go to the next track or the previous tracks Selecting a discTo go to a particular disc directly To go to the next discs or the previous discsSelecting CD playback modes To select a disc using the disc listsENGLISH 1 While playing a CD, press and holdIndicator IndicatorTo play back only intros Intro Scan ENGLISH3 Adjust the volume Playing an external component4 Adjust the sound as you want. See pages EXTERNAL COMPONENT OPERATIONSWhat is DAB system? Tuning in to an ensemble and one of the servicesDAB TUNER OPERATIONS ENGLISHTo restore the FM/AM tuner Storing DAB services in memory4 Select a service either primary or 4 Select a service of the ensemble you wantSelecting a preset service directly Tuning in to a preset DAB serviceENGLISH 1 Select the DAB tunerTo use Alternative Reception What you can do more with DABENGLISH 1 Select the DAB tunerservice service received is either primary or secondary3 Each service can have several PTY codes. If a Changing the display patternSymptoms TROUBLESHOOTINGENGLISH CausesENGLISH SymptomsCauses RemediesHow to handle discs MAINTENANCETo keep discs clean When playing a CD-Ror CD-RWAUDIO AMPLIFIER SECTION SPECIFICATIONSTUNER SECTION CD PLAYER SECTIONRefer to page of How to reset your unit Please reset your unitBitte setzen Sie Ihr Gerät zurück Réinitialisez votre appareil