Efficient Networks 5667 Hardware Installation, Hardware Features, LED Indicators, Before Starting

SpeedStream Dual USB/Ethernet Router User’s Guide

Model 5667

Hardware Features

AAL and ATM Support

VCI 0-65535 address range

Connectors

ADSL interface: RJ-11

Ethernet interface: RJ-45

Console interface: 5-pin MiniDIN RS-232

USB Type B interface

Standards Compliance

DMT, ADSL

LED Indicators

After powering on the router, all LED indicator lights turn a solid green. The LED behavior will change depending on the various connection states and data activity of the router. Refer to the table below for details:

	power	adsl	act	eth	usb
Unlit	Off	DSL not	DSL not	Ethernet port not	USB port not connected;
		connected	connected	connected; check Ethernet	check USB cable
				cable connection if using	connection if using USB
				Ethernet interface	interface
Solid	On	Ready for data	N/A	Ethernet port connected to	USB port connected to
		traffic		LAN	host
Blinking	N/A	Searching for	DSL traffic	Ethernet traffic flow	USB traffic flow
		signal	flow
All	Post failure
Blinking

Hardware Installation

Before Starting

Please collect the following information from your ISP before setting up the SpeedStream Dual USB/Ethernet Router:

•An ISP account (may include user name and password for PPPoE or PPPoA service)

•IP address for your ISP’s gateway and domain name servers (for non-PPP/non-DHCP services).

•ISP authentication type or script (if not PAP/CHAP).

•IP address and subnet mask (for fixed IP accounts only).

10