Directed Video RVM560 manual System Settings Menu, Security ESP/ESP2 only

Page 10

SECURITY (ESP/ESP2 ONLY)

NOTE: This menu contains selections that have addi- tional settings.

ESP/ESP2 programming and zone information. TRIGGER INFORMATION - Displays ESP/ESP2 zone information. (Always displays the last zone triggered only.) See the Assign Trigger Names menu.

SYSTEM SETTINGS - Displays the System Settings menu. See the System Settings menu.

SETUP (MCB1000 ONLY)

NOTE: This menu contains selections that have additional settings. This menu is used for initial system setup only.

Change hardware settings and rename zones. HARDWARE OPTIONS - Displays the Hardware Options menu. See the Hardware Options menu. ASSIGN SOURCE NAMES - Displays the Source Names menu. See the Source Names menu for a list of names.

ASSIGN TRIGGER NAMES - Displays the Trigger Names menu. See the Trigger Names menu.

IMPORTANT!Any changes in the following menus must be written into the MCB1000 and ESP/ESP2 software. Before the menu is exited the “write to system” procedure must be completed.

SYSTEM SETTINGS MENU

SELECTION

DESCRIPTION AND OPERATION

PASSIVE/ACTIVE ARMING

Program the ESP/ESP2 security system to arm by itself

(passive)

 

 

or if its remote must be used for arming (active). For a

 

full description of this setting refer to your ESP/ESP2

 

owner’s guide.

CHIRPS ON/OFF

This feature will turn the arming and disarming chirps

 

on/off. For a full description of this setting refer to the

 

ESP/ESP2 owner’s guide.

IGNITION LOCK ON/OFF

When turned on, the doors will lock three seconds after

 

the ignition is turned on. For a full description of this

 

setting refer to the ESP/ESP2 owner’s guide.

IGNITION UNLOCK ON/OFF

When turned on, the doors will unlock when the ignition

 

is turned off. For a full description of this setting refer

 

to the ESP/ESP2 owner’s guide.

PASSIVE/ACTIVE LOCKING

This feature controls whether the doors will lock when

 

the ESP/ESP2 security system passively arms itself. For a

 

full description of this setting refer to your ESP/ESP2

 

owner’s guide.

10

© 2001 Directed Electronics, Inc.

Image 10
Contents LCD Video Monitor Page Table of Contents Limited Three-Year Warranty When Cleaning the Vehicle When Parked Safety InstructionsImportant Safeguards While DrivingFeatures Important InformationMonitor Description Maintenance Basic OperationMaking Changes to System Settings On-Screen MenusSetup Menu Descriptions and Operation Selection Description and OperationSystem Settings Menu Security ESP/ESP2 onlyHardware Options Menu Write to SystemAssign Source Names Menu Assign Trigger Names MenuSource Names Trigger Names Installing the Monitor InstallationMonitor Specifications Removing the MonitorMonitor Connector Mounts Company behind this system is Directed Electronics, Inc