On-Screen Menus

The Setup Menu is a list of programming selec- tions that control system operation and screen settings.

Each selection has a list of settings that can be changed to optimize system operation.

Some settings may have additional settings. Notes that include any specific programming instructions for these are included under the selection heading.

SETUP MENU

Basic Operation section of this guide.

1.Press MODE to enter the Setup Menu.

2.Press UP or DOWN to highlight the selection.

3.Press MODE to enter that selection Menu.

4.Press UP or DOWN to highlight the setting.

5.Press MODE to change the setting, display additional settings menus, or toggle through a list of possible settings.

USINGTHE UNIVERSAL REMOTE CONTROL

(Included with MCB1000)

NOTE: For a guide to remote control button locations refer to the MCB1000 guide.

1.Channel - Appears if the TVM300 is con- nected and TV is the source.

2.Screen - Appears in the RVM700 monitor menu only.

3.Security - Applies when ESP/ESP2 security systems are connected; only ESP2 will dis- play trigger zones.

4.Setup - Appears if the MCB 1000 Expanded Menu switch is on.

MAKING CHANGES TO SYSTEM SETTINGS

USINGTHE MONITOR CONTROL BUTTONS

NOTE: For a guide to monitor button locations refer to

1.Press MENU to enter the Setup Menu.

2.Press (+) or (-)to highlight the selection.

3.Press MENU to enter that selection menu.

4.Press (+) or (-)to highlight the setting.

5.Press MENU to change the setting, display additional setting menus, or toggle through a list of possible settings.

EXITING MENUS

After making setting changes, use the following steps to exit the menus.

1.Highlight BACK, press the monitor’s MODE button or the remote’s MENU button to return to the previous menu

2.Highlight EXIT, press monitor’s MODE button or the remote control’s MENU button or make no entry for eight seconds, you will exit all menus and return to the current video source display.

8	© 2001 Directed Electronics, Inc.