Directed Video RVM560 manual Installation, Monitor Specifications, Installing the Monitor

Installation

MONITOR SPECIFICATIONS

RVM 560
	Screen size	5.6"
	Resolution	74,880 pixels
	View angle	Top 10 degrees
		Bottom 30 degrees
		Left 45 degrees
		Right 45 degrees
	Video system	ntsc/pal
	Osd language	English
	Power requirements	10 - 15 vdc
	Operating temp.	35 - 115 degrees
		fahrenheit
RVM 680
	Screen size	6.8"
	Resolution	89,856 pixels
	View angle	Top 10 degrees
		Bottom 30 degrees
		Left 45 degrees
		Right 45 degrees
	Video system	ntsc/pal
	Osd language	English
	Power requirements	10 - 15 vdc
	Operating temp.	35 - 115 degrees
		fahrenheit
RVM 700
	Screen size	7.0"
	Resolution	112,320 pixels
	View angle	Top 60 degrees
		Bottom 30 degrees
		Left 60 degrees
		Right 60 degrees

Video system	ntsc/pal
Osd language	English
Power requirements	10	- 15 vdc
Operating temp.	35	- 115 degrees
	fahrenheit

INSTALLING THE MONITOR

All monitors that work with the OHC100 attach to the monitor door in the same way.

■Start with the monitor door in the viewing position.

■At both bottom corners of the monitor are spring-loaded monitor mounts. Place one of these against the mounting bracket (2) and guide the other end of the monitor into the bracket on the other side of the monitor.

■Tilt the monitor up into the mount and press firmly until a click is heard. The con- nector at the back of the monitor is self- guiding and will connect automatically to the monitor connector (4).

■The Hot Foot adapter is for use with the MMS1 Universal Monitor Mounting Pedestal. Place the Hot Foot adapter mounting plate onto the monitor connector and secure using the provided machine screws.

REMOVING THE MONITOR

■With the monitor door in the viewing position, press the monitor release button

(1). At the same time, gently tilt the top of the monitor down. Firmly hold the monitor while pressing to one side and pull away from the monitor door.

14 © 2001 Directed Electronics, Inc.