Directed Electronics HON-SC1 manual Installation

Installation

Directed Electronics recommends that you have this prod- uct professionally installed. It is recommended that prior to starting the installation, you thoroughly read this manual and follow the guidelines listed below:

Some installations may use the factory satellite radio tuner location. If you are using this location, please follow the factory instructions for installing the HON-SC1 in your vehicle. If you are not using this location, please read the following installation guidelines.

Consider the mounting location carefully. You should make sure that you avoid the following:

•Any location where the unit is exposed to moisture.

•Any location where the unit is exposed to extreme heat.

•Any location that would interfere with moving parts on the vehicle or hamper driving.

Mounting the HON-SC1 Interface: Be sure that you find a location that is flat and has clearance above the unit to prevent any damage as well as allow for ventilation.

Do not install the HON-SC1 under the carpet or in a small enclosed area without proper ventilation. Doing so can result in damage to the tuner or the vehicle.

Use the supplied screws to securely fasten the unit.

Note: Refer to SCC1 or SC-VDOC1 manuals for additional installation instructions needed to complete the system.

10

© Directed Electronics, all rights reserved.