Dell UCS-51 manual Device may not be ready at this time. The device will be

Table 6-4. BIOS Error Messages (continued)

Message	Meaning
Device not available at	Device may not be ready at this time. The device will be
	retried. If the problem persists, restart your system.
Spinning up the device!	The device currently being scanned is being spun up.
ERROR! Device is not responding to	The device did not respond to a read capacity command.
Read Capacity	Contact Dell.
Failed to add device, too many	Could not allocate resources for additional devices.
devices!
ERROR! Adapter Malfunctioning!	The adapter did not initialize properly. There may be a
	problem with the adapter configuration. Reload the BIOS
	configuration. Invoke the configuration utility again and see
	if the issue persists.
MPT firmware fault	The LSI Logic MPT firmware faulted. Contact Dell.
Adapter removed from boot order!	An controller that was previously in the boot order was not
	found. It has either been removed from the system or moved
	to a different slot.
Updating Adapter List!	A new adapter was found for which there is no record.
	A record will be created for it.
Adapter(s) disabled by user	An adapter was found, but it has been disabled in the
	Configuration Utility and will not be used by the BIOS.
Adapter configuration may have	A controller has been moved or reinstalled in the system. Add
changed, reconfiguration is	it to the boot order using the available resources.
suggested!
Memory allocation failed	The controller could not allocate enough memory to load the
	Configuration Utility, its strings file, or its options file.
	Reboot the system.
Invalid or corrupt image	One of the images for the Configuration Utility, its strings
	file, or its options file is corrupt. Reload the BIOS. Reflash the
	firmware.
Image upload failed	Could not upload the image for the Configuration Utility, its
	strings file, or its options file. Reload the BIOS.Reflash the
	firmware.

Troubleshooting

39