17Repeat steps 10 through 13 to set each Octet for Gateway.
A Static IP Address has been assigned to the printer. You can verify the settings by opening a web browser on any computer on the same network and entering the IP address into the Address line of the browser. Example: http://192.168.1.108. If the IPS address was setup correctly, the browser should display a Web page provided by the Dell Laser Printer M5200 printer.
Install printer drivers
1Insert the Drivers and Utilities CD.
2Click Install the printer on the Network (Network Installation).
3Click On one or more remote client computers.
4Type your Administrator user name and password.
5Specify which client computers are allowed to print to the new Dell Laser Printer M5200 printer.
Browse or type each client’s computer name or IP address. You can specify as many clients as you wish.
6When you are finished adding clients, click Next.
7Select the software and documentation you want your users to have access to.
8Select TCP/IP, and then click Next.
If your network also uses NetWare, select NetWare Systems too.
9Set TCP/IP Port as the Port Type.
10Specify a port name that is meaningful in your environment. The port name establishes a logical link between the printer and each client.
11Type the printer IP address, for example, 192.168.0.11. If you don’t know the IP address, see "Locate the IP address" on page 23.
12Click Finish.
The Congratulations screen appears.
13Click Finish.
Now all of the clients connected to this printer can select this printer to print their jobs.
Set up for network printing
25